User`s guide

Installing Windows Server 2003 X64 Editions E-17
Optional Network Board Driver
For utilize an optional Network Board (Intel Pro/100S, Pro1000MF, Pro/1000 MT, Pro/1000 GT, Pro/1000 PT), the network
driver will be installed automatically. Therefore, the driver attached to the Network board should not be used.
If you want to use optional Network Board Intel Pro/100S, install the driver stored in ExpressBuilder DVD.
 In case of utilizing Intel Pro/100S
"\009\win\winnt\w2k3amd\ma21\pro100\winx64"
 In case of utilizing Intel Pro1000MF, Pro/1000 MT, Pro/1000 GT, Pro/1000 PT
"\009\win\winnt\w2k3amd\ma21\pro1000\winx64"
If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the
Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2. Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel (R) PRO/1000...)] is the name of On-Board adapter. All other names show the
Optional Network Board.
3. Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard] appears.
4. Select the [Install from a list or specific location (Advanced)] radio button and click [Next].
5. Select the [Search for the best driver in these locations] radio button and check off the [Search removable media
(floppy, CD-ROM...)] check box.
6. Check the [Include this location in the search] check box and when using [(Intel Pro/100S)], specify
[\009\win\winnt\w2k3amd\ma21\pro100\winx64].
Then click [Next].
When using [(other adapters than Intel Pro/100S)], specify [\009\win\winnt\w2k3amd\dl3\pro1000\winx64].
Then click [Next].
7. Click [Finish].
Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)
Adapter Fault Tolerance (AFT) is a feature that creates a group containing more than one adapter and automatically converts
the process of the working adapter to the other adapter in the group when any trouble occurred on that adapter.
Adaptive Load Balancing (ALB) is a feature that creates a group containing more than one adapter and enhances the
throughput by operating packet transmission from the server by all the adapters.
This feature includes AFT feature.
IMPORTANT:
 All the adapters specified as a group of Adapter Teaming must exist on the same LAN. If they
are connected to the separate switches, they will not work normally.
 The adapters specified as a group of Adaptive Load Balancing (ALB) can be connected to only
Switching Hub.
 When exchange the mother board or option network card, make sure to remove the adapter
team before exchanges and recreate the adapter team after exchange complete.