User`s guide

Installing Windows Server 2003 X64 Editions E-5
Creating "Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER"
Before installing, create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER.
NOTE: If you have already "Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER" for NovaScale R440 E2 Server which you are going to install Windows
Server 2003 x64 Editions, you do not need to create it again.
You can create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER with the following two procedures.
Create from the menu which appears when running NovaScale R440 E2 Server with ExpressBuilder.
If you have only NovaScale R440 E2Server to create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER,
use this procedure.
If Windows Server 2003 can be operated on NovaScale R440 E2 Server, you can use the other procedure described later.
Follow the steps below.
1. Prepare one 3.5-inch floppy disk.
2. Turn on your NovaScale R440 E2 Server.
3. Insert the ExpressBuilder DVD into the optical disk drive of the server.
4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may also turn off and then on again
to reboot the server.)
The system will boot from the DVD-ROM and ExpressBuilder starts.
5. Select [Create the OEM-Disk for Windows] from [Tools Menu] step.
6. Insert a floppy disk into the floppy disk drive.
7. Select [Create an Windows Server 2003 x64 Editions OEM-Disk for EXPRESSBUILDER] at [Create OEM-Disk]
and click [Perform].
8. Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.