User`s guide

Installing Windows Server 2008 D-29
Installing RAID Controller Driver
The installation procedure depends on your environment.
Follow steps below appropriate to your environment.
z If the Internal RAID Controller or
LSI Logic SAS CTRL 8708EM2 is used:
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-Play.
z If the Internal RAID Controller or
LSI Logic SAS CTRL 8708EM2 is not used:
Please install the driver by the following procedures.
1. Start [Device Manager] from [Start] menu → [Administrative Tools]→ [Computer Management].
2. Double-click the "LSI Logic MegaRAID SAS 8880EM2 RAID Controller" which Device Manager lists as "Storage
controllers".
3. Click [Update Driver].
4. When the "Update Driver Software- Logic MegaRAID SAS 8880EM2 RAID Controller Wizard" appears, select
"Browse my computer for driver software".
5. Select "Let me pick from a list of device drivers on my computer".
6. Click [Have Disk..].
7. Insert "ExpressBuilder DVD" into the optical disk drive.
Enter a path to the folder in the ExpressBuilder DVD into "Copy manufacturer's files from:" and click [OK].
– Windows Server 2008 64-bit (x64) Edition:
<drive letter>:\009\win\winnt\oemfd\ws2008x64\fd1\megasas
– Windows Server 2008 32-bit (x86) Edition:
<drive letter>: \009\win\winnt\oemfd\ws2008\fd1\megasas
8. Specify the following driver and click [Next].
– [LSI Logic MegaRAID SAS 8880EM2 RAID Controller]
9. Click [Close].
The installation of the driver is completed.
Restart the system.
Installing Fibre Channel Controller Driver
If you use the Fibre Channel Controller Emulex LPe1150 or Emulex LPe11002, you do not need to install the driver manually.
It is automatically installed by Windows Plug-and-Play.