User`s guide

D-28 Installing Windows Server 2008
Graphics Accelerator Driver
If you use standard graphics accelerator drivers, update your system with ExpressBuilder DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
NOTE: <Windows Server 2008>
The graphics accelerator driver is supported only on a server running a full installation. Use VGA
on a server running a Server Core installation.
Please follow the following procedure when you want to reinstall the driver individually.
1. Insert the ExpressBuilder DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "Install.bat" in the following directory.
– Windows Server 2008 64-bit (x64) Edition:
\009\win\winnt\ws2008x64\video
– Windows Server 2008 32-bit (x86) Edition:
\009\win\winnt\ws2008\video
4. Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5. Remove the ExpressBuilder DVD from the optical disk drive, restart the system.
Installing SCSI Controller Driver
If you use the SCSI Controller ADAPTEC 29320ALP or ADAPTEC 29160LP or Adaptec ASC-29320LPE , you do not need to
install the driver manually. It is automatically installed by Windows Plug-and-Play.
Installing SAS Controller Driver
If you use the SAS Controller LSI Logic SAS CTRL 3442E-R, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.