User`s guide

Installing Windows Server 2008 D-27
Remove Team
1.
Open the [Device Manager].
2. Click [Network adapters], and open [TEAM: "Team name"] properties.
3. Click [Setting] tab.
4. Click [Remove Team] button.
5. Click [Yes] to the message.
6. Confirm [TEAM: "Team name"] adapter in not existing in [Network adapters] tree and reboot the system.
Setting WOL
Refer to the following procedure to enable WOL.
1. Start Device Manager.
2. Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server Network
Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2] to open the adapter [Properties].
3. Click [Power Management] tab and change setting in [Wake On LAN] according to the following list.
Setting item Default setting Change setting
"Wake On Directed Packet" ON OFF
"Wake On Magic Packet" ON OFF
"Wake on Magic Packet from power off state" OFF ON
NOTES:
 [Power Saver Options] setting is not necessary to change.
 Above setting will maintained until manually resetting are executed.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if the network port are not
available of WOL.
4. Click [OK].
5. Reboot the system.
IMPORTANT:
 WOL (Wake On Lan) is available only in system Shutdown mode.
 WOL (Wake On Lan) is not available in system Hibernate and Sleep mode.