User`s guide

Installing Windows Server 2008 D-21
Application Process of "Updating the System"
"Updating the System" applies the drivers necessary for NovaScale R440 E2.
1. Log on to the system using an administrator account.
2. Insert the ExpressBuilder DVD into the optical disk drive.
3. Hereinafter, the setup process is depending on the content selected at [Installing Windows Server 2008], follow each
of the instructions.
– If you have selected a full installation
If the menu is displayed, click [Setup Windows] and click [Update the system].
NOTE: Right-clicking on the Menu produces the same outcome.
– If you have selected a Server Core installation
1) Execute the following command line from command prompt to specify the optical disk drive (e.g. D drive).
cd /d d:\009\win\winnt\bin\oschk\
C:\Users\administrator>cd /d D:\009\win\winnt\bin\oschk
2) Type following command line and press Enter.
oschk.bat
D:\009\win\winnt\bin\oschk>oschk.bat
The following box appears.
4. Read the message, and then click [OK].
The update starts.
NOTE: The following box appears during the update if you have deployed a full installation of
Windows Server 2008. Wait until the update completes.