User`s guide

D-20 Installing Windows Server 2008
5. Change the password, and then click the button.
NOTE: The Windows Server 2008 password must combine
uppercase letters, lowercase letters, and numbers.
6. When the following message appears, click [OK].
7. At the command prompt, enter user information.
NOTE: For more detailed procedure, see the "Microsoft Windows Server 2008 Step-By-Step
Guide".
After installations is completed, be sure to execute the tasks described in "Setup of Device Driver (Normally Install in Server)"
and "Updating the System" of this chapter.
Updating the System
Update the system in the situation below:
 CPU is expanded (expanded to single processor to multi-processor).
 Modified system configuration.
 Recovered the system using recovery process.
The system update brings the correction program provided by Microsoft to be applied to reinforce the system security.
The system update is recommended.