User`s guide

D-16 Installing Windows Server 2008
 If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is used:
Select [Load Driver], and then click [Browse].
The folder reference dialog box appears. Select a path to the folder in the ExpressBuilderR DVD, and then click
[OK].
– Windows Server 2008 64-bit (x64) Edition:
<drive letter>:\009\win\winnt\oemfd\ws2008x64\fd1\megasas
– Windows Server 2008 32-bit (x86) Edition:
<drive letter>: \009\win\winnt\oemfd\ws2008\fd1\megasas
After you select the path, a list of drivers is displayed. Select the following driver, and then click [OK]. Go to Step
11.
[LSI Logic MegaRAID SAS 8708EM2 RAID Controller]
 If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is not used:
Go to Step 12.
11. Remove the ExpressBuilder and set Backup DVD-ROM or Windows Server 2008 DVD-ROM.
12. Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT: If the partition has already been created, go to step 14.
13. Click [New], enter a partition size, and then click [Apply].
14. Select the partition created in step 12, and then click [Format].
15. Select the partition created, and then click [Next].
When the following message appears, the installation starts automatically.