User`s guide

General Description 2-13
DISK ACCESS LED ( )
The DISK ACCESS LED indicates the status of the hard disk drive mounted in the disk bay.
The LED turns green each time access is made to the hard disk drive.
When the DISK ACCESS LED turns amber, it indicates that a hard disk drive failure has occurred. Check the hard disk drive
LED for the status of the failing hard disk drive.
ACT LED ( )
The ACT LED is green while the server is connected to the LAN. The LED flashes while the server is accessed via the LAN
(during transmission/reception of packets). The number next to the icon indicates the network port number on the rear panel of
the server.
UID LED (UID)
Pressing the UID switch toggles the front panel UID LED (blue) and the mother board UID LED on and off. The mother board
UID LED is visible through the rear of the chassis and allows you to locate the server you're working on from the rear of the
servers in a rack.
Disk Access LED
The disk access LED of the optical disk drive is on while the drive is accessed.