User`s guide

9-78 Upgrading Your Server
Installation
See "PCI Board" in this chapter and the manual that comes with the optional RAID Controller for the installation of a RAID
Controller LSI Logic SAS CTRL 8708EM.
IMPORTANT:
 The riser card for low-profile PCI board differs from the one for full-height PCI board. Before
installing a PCI board, make sure of the board specification.
 Some RAID Controller has LED cable connector to be used for indication of disk access.
However, this server is not equipped with LED cable connector.
 To use internal hard disk drives in a RAID System by connecting the RAID Controller to the
full-height riser card, first connect the cable, then connect the riser card to the mother board.
 When the RAID Controller is connected, the boot priority specified in the BIOS SETUP utility
must be 8 or less. If specified 9 or more, the configuration menu of the RAID Controller will
fail to start.