User`s guide

Upgrading Your Server 9-43
13. Make sure that the heat sink sits flush.
NOTES:
 If the heat sink is not flush, remove it, and then install it again. The following probably causes
the heat sink not to be flush:
– The CPU is not positioned correctly.
– All screws are not completely tightened.
 Do not move the secured heat sink.
14. Reinstall the processor duct.
NOTES:
 Check to see that the processor duct is firmly installed with no clearance between the duct and
the chassis.
 Check to see that no cable is caught between the duct and the mother board.