User`s guide

General Description 2-7
11 Management LAN port
100BASE-TX/10BASE-T interface port used to manage the server via LAN.
12 DUMP (NMI) switch
Press this switch to dump system memory.
13 UID switch
Press this switch to turn on/off the UID LEDs on the front and rear panels of the server.
Pressing the switch once turns on the LEDs. Pressing it again turns them off.
14 UID LED (blue)
This LED goes on when the UID switch is pressed. (The LED also goes on when software
issues a command.)
15 USB connectors
Connect device compliant with the USB interface to this connector.
16 Monitor connector
Connect the display unit to this connector. Do not use it if the one on the front panel is
already connected to a monitor.
17 Serial port (COM) connector
Connect devices having a serial interface to this connector.
A leased line cannot be connected directly to this connector.