User`s guide

Upgrading Your Server 9-17

2.5-inch Hard Disk Drive

See the section "Preparing for Installation and Removal" described earlier.

2. Unlock the front bezel with the security key, and remove the front bezel.

3. Push the lever to unlock, and open the handle.

IMPORTANT: Do not press the POWER switch during the installation or removal of the hard

disk drive if your server is running.

4. Firmly hold the handle and hard disk drive, and pull out the hard disk drive.

5. If using the server with the hard disk drive removed, install the dummy tray in the vacant slot to ensure the cooling

efficiency.

6. Install the front bezel you removed in step 2.