User`s guide

9-14 Upgrading Your Server
IMPORTANT:
 Be careful not to get your finger caught between the handle and tray.
 Push the drive further to check if it is firmly secured.
NOTE: Check that the handle is hooked to the frame when having inserted the hard disk drive.
9. Power on the server, and run the SETUP utility.
Select the [Boot] menu to set the boot priority. When you have installed an additional hard disk drive, the boot
priority stored in the BIOS is cleared. See Chapter 4 for details.
10. Install the front bezel you removed in step 2.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame, install the front bezel, and
lock it with the security key.