User`s guide

Upgrading Your Server 9-13
5. Firmly hold the drive carrier, and insert it into the slot.
6. Put your fingers on the front of the drive carrier.
7. Push the drive carrier into the slot until it stops.
IMPORTANT:
 Check that the handle is hooked to the frame when having inserted the hard disk drive.
 Be careful not to get your finger caught between the handle and tray.
NOTE: The hard disk drive bay is located close to the POWER switch. Pay attention not to press
the POWER switch when installing/removing the hard disk drive. If the POWER switch is pressed
by mistake, the system starts the shutdown process.
8. Slowly close the handle.
The drive carrier is locked when a "click" is heard.