User`s guide

9-12 Upgrading Your Server

2.5-inch Hard Disk Drive

See the section "Preparing for Installation and Removal" described earlier.

2. Locate the slot in which you are going to install a hard disk drive.

The server has six slots. Fill the vacant slots with hard disk drives from the lower port number.

3. Remove the dummy tray or drive carrier if installed.

IMPORTANT:

 Keep the dummy tray for future use.

 The purpose of a dummy tray is to increase the cooling effect in the server. Install a dummy

tray in slots not containing a hard disk drive.

4. Unlock the hard disk drive handle.