User`s guide

Upgrading Your Server 9-11
7. When the handle begins to close by itself , slowly close the handle.
The drive carrier is locked when a "click" is heard.
IMPORTANT:
 Be careful not to get your finger caught between the handle and tray.
 Push the drive further to check if it is firmly secured.
8. Power on the server, and run SETUP utility.
Select [Boot] menu to set the boot priority. When you have installed an additional hard disk drive, the boot priority
stored in the BIOS is cleared. See Chapter 4 for details.
9. Install the front bezel you removed in step 2.
There are tabs on the left side of the front bezel. Engage the tabs with the server frame, install the front bezel, and
lock it with the security key.