User`s guide

9-6 Upgrading Your Server
HARD DISK DRIVE
The disk interface, number and size of hard disk drives depend on the server model, as described below. The IDs of hard disk
drive (channel numbers or port numbers) are also predefined.
3.5-inch Disk Model
SATA hard disk drive
The Onboard RAID Controller (LSI Embedded MegaRAID) or optional RAID Controller (LSI Logic SAS CTRL 8708EM2)
supports serial ATA (SATA) interface. Up to three hard disk drives (mounted on the dedicated 3.5-inch width tray) can be
installed.
IMPORTANT: Use the hard disk drives authorized by Bull. Installing a third-party hard disk
drive may cause a failure of the server as well as the hard disk drive. Purchase hard disk drives of
the following models:
– 250GB, 7200rpm, SATA2/300
– 500GB, 7200rpm, SATA2/300
– 750GB, 7200rpm, SATA2/300
– 1TB, 7200rpm, SATA2/300