User`s guide

Upgrading Your Server 9-3
ANTI-STATIC MEASURES
The server contains electronic components sensitive to static electricity. Avoid failures caused by static electricity when
installing or removing any optional devices.
 Wear a wrist strap (an arm belt or anti-static glove).
Wear a wrist strap on your wrist. If no wrist strap is available, touch an unpainted metal part of the cabinet before
touching a component to discharge static electricity from your body.
Touch a metal part regularly when working with components to discharge static electricity.
 Select a suitable work space.
– Work with the server on the anti-static or concrete floor.
– When you work with the server on a carpet where static electricity is likely to be generated, make sure to take
anti-static measures beforehand.
 Use a work table.
Place the server on an anti-static mat.
 Cloth
– Do not wear a wool or synthetic cloth when working with the server.
– Wear anti-static shoes when working with the server.
– Take off any jewels (a ring, bracelet, or wrist watch) before working with the server.
 Handling of components
– Keep any component in an anti-static bag until you actually install it in the server.
– Hold any component by its edge to avoid touching any terminals or parts.
– To store or carry any component, place it in an anti-static bag.