Manualshelf

User`s guide

ManualsBrandsBull ManualsComputer equipmentNovaScale R440 E2
351352353354355356357358359360
8-46 Troubleshooting
RESETTING THE SERVER
If the server halts before starting the OS, press and hold Ctrl and Alt and press Delete.
This restarts the server.
Pressing the RESET switch on the front panel reboots the server.
RESET switch
IMPORTANT: Resetting the server clears the DIMM memory and the data in process. Before
resetting the server when it is not frozen, make sure that no processing is in progress.
FORCED SHUTDOWN
Use this function when an OS command does not shut down the server, the POWER switch does not turn off the server, or
resetting does not work.
Press and hold the POWER switch on the server for at least four seconds. The power is forcibly turned off. To turn on the
power back again, wait approximately 30 seconds after turning off the power (forced shutdown).
POWER switch
IMPORTANT: If the remote power-on function is used, cycle the power once to load the OS, and
turn off the power again in the normal way.