User`s guide

Troubleshooting 8-43
 BIOS/FW Updating
This menu allows you to update the software module such as BIOS and firmware of the server by using the update
disk (3.5-inch floppy disk) that is distributed from Bull customer service representative.
After rebooting the system, an update program is started automatically from the floppy disk, and the various BIOS
and firmware programs are updated.
IMPORTANT: Do not turn off the server while the update program is running. If the update
processing is discontinued, the system becomes unable after restarting.
 ROM-DOS startup FD
Creates a support disk for starting the ROM-DOS system.
 Test and diagnostics
Execute various tests on the server system to check if the server functions are normal and if the connection between
the server and additional board is normal.
After the Test and diagnostics is executed, a system check program assigned to each model starts. See Chapter 7 for
details.
 System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control and alert.
This menu's function is the same as the "System Management" of the "Maintenance Utility".