User`s guide

8-42 Troubleshooting
Function of Maintenance Tools
The following functions can be executed in the Maintenance Tools.
 Maintenance Utility
The Off-line Maintenance Utility is started in Maintenance Utility. The Off-line Maintenance Utility is an
OS-independent maintenance program. When you are unable to start the OS-dependent NEC ESMPRO to
troubleshoot a problem, the Off-line Maintenance Utility can be used.
IMPORTANT:
 The Off-line Maintenance Utility is intended for use by your service representative. The
ExpressBuilder DVD you have created contain a file that describes operation of the utility, but
do not attempt to use the utility by yourself. Contact your service representative and follow
instructions.
 See the on-line help for details of the Off-line Maintenance Utility. For further information, ask
your service representative.
The Off-line Maintenance Utility provides the following features.
– IPMI Information Viewer
Provides the functions to view the system event log (SEL), sensor data record (SDR), and filed replaceable
unit (FRU) and to make a backup copy of them.
Using this feature, you can find system errors and events to determine a maintenance part.
– BIOS Setup Viewer
Provides the functions to export the current configuration data defined with the SETUP utility to a text file.
– System Information Viewer
Provides the functions to view information on the processor and the BIOS and export it to a text file.
– System Information Management
Provides the function to make a back-up copy of your data.
Without the backup data, the system-specific information and/or configuration may not be restored.
Only the authorized personnel is allowed to restore the backup data.
– System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control and alert.