User`s guide

8-40 Troubleshooting
Maintenance Tools
The Maintenance Tools utility is a tool for maintaining the serve and analyzing the trouble.
Starting the Maintenance Tools
The Maintenance Tools utility can be started as follows.
1. Turn on the peripheral devices and the server in this order.
2. Insert the ExpressBuilder DVD supplied with your server into the optical disk drive of your server.
3. Press Ctrl, Alt, and Delete to reboot the server from the ExpressBuilder. (You may also turn off and then on again
to reboot the server.)
System boots up displaying Boot selection menu.
IMPORTANT: An initial selection of the menu is "Os installation". "Os installation" starts
automatically after the Boot selection menu is displayed.
4. When a local console is used, "Tool menu (Normal mode)" is selected.
Moreover, "Tool menu (Redirection mode)" is selected when using it with remote console.
IMPORTANT: An initial selection of the menu is "Japanese". "Japanese" is displayed
automatically when the option is not selected five seconds after the Language Selection menu is
displayed.
5. "English" is selected.
The tool menu is displayed.