User`s guide

Troubleshooting 8-5
Error
code
Error message Recommended Action
02D1 System Memory exceeds the CPU's caching
limit.
02F4 EISA CMOS not write able.
02F5 DMA Test Failed.
02F6 Software NMI Failed.
02F7 Fail-safe Timer NMI Failed.
Contact your service representative.
0611 IDE configuration changed
0612 IDE configuration error - device disabled
Check IDE configuration.
0613 Com A configuration changed
0614 Com A config. error - device disabled
Check COM A configuration.
0615 Com B configuration changed
0616 Com B config. error - device disabled
Check COM B configuration.
0B22 Processors are installed out of order. Request the maintenance to replace the
CPU.
0B28 Unsupported CPU detected on CPU socket
1.
0B29 Unsupported CPU detected on CPU socket
2.
Make sure that the server supports the
CPU. If you are not sure, contact your
service representative to request the
maintenance.
0B42 Resource Conflict
0B43 Warning: IRQ not configured
0B45 System configuration Data Write Error
Contact your service representative.
0B60 CPU1_DIMM1 has been disabled
0B61 CPU1_DIMM2 has been disabled
0B62 CPU1_DIMM3 has been disabled
0B63 CPU1_DIMM4 has been disabled
0B64 CPU1_DIMM5 has been disabled
0B65 CPU1_DIMM6 has been disabled
Contact your service representative.
0B66 CPU2_DIMM1 has been disabled
0B67 CPU2_DIMM2 has been disabled
0B68 CPU2_DIMM3 has been disabled
0B69 CPU2_DIMM4 has been disabled
0B6A CPU2_DIMM5 has been disabled
0B6B CPU2_DIMM6 has been disabled
0B70 The error occurred during temperature
sensor reading.
Contact your service representative.