User`s guide

Installing and Using Utilities 6-13
IMPORTANT:
 If you install Windows Server 2003 R2, do not apply Service Pack using Express Setup. If
you install Service Pack, apply Windows Server 2003 R2 DISC 2 after Express Setup
completion, then install Service Pack referring to the procedure in "Updating the system".
 About partition size
– Specify a partition size larger than the minimum size required for OS installation.
– Do not specify a partition size larger than the capacity of the connected hard disk drive.
– You cannot specify a logical drive larger than 2,097,144MB for a RAID system.
 If you select "Create a new partition" in "Windows system drive settings", the contents of the
hard disk will be deleted.
 If "Use existing partitions" is selected, ExpressBuilder installs the Operating System to the
1st partition (1st partition is deleted). The data in the other partitions is kept if the system has
two or more partitions. (See the figure below.)
First
Partition
Deleted
Second
Partition
Retained
Third
Partition
Retained
 You cannot re-install the system with the existing partition that is upgraded to Dynamic Disk.
Do not select "Use existing partitions" in "Windows system drive settings".
 When Windows Server 2008 (32bit editions) is selected after a RAID has been newly
constructed in the [Enter RAID settings] screen, the following message is displayed.
"Please create RAID before you start Express Setup".