User`s guide

Installing and Using Utilities 6-11
7. Enter the setting of a logical drive.
The [Enter RAID setting] steps are displayed. Confirm the parameters, modify if necessary, then click [Next].
IMPORTANT: In "The number of the total physical devices", Parameter File Creator displays
the upper limit that the RAID Controller can support.
The total of "The number of physical devices used to create the logical drive" and "The number
of the physical devices specified as the hot spare" must not exceed "The number of the total
physical devices" which connected to the target system".
NOTE: You can use only the physical devices that have the same model number to configure a
logical drive.