User`s guide

5-66 Installing the Operating System with Express Setup
Network Monitor
Using Network Monitor helps you to investigate and manage network troubles.
Network Monitor Setup (Windows Server 2008)
Microsoft Network Monitor allows you to examine and troubleshoot network problems.
NOTE: Windows Server 2008 does not provide Network Monitor. To use Network Monitor on
Windows Server 2008, install Network Monitor as follows.
1. Download Microsoft Network Monitor from the following web site:
http://support.microsoft.com/kb/955998/en-us
2. Run the downloaded file to start the installer.
Follow the on-screen instructions to install Network Monitor.
NOTE: If a Security Alert appears, click [Run]. Select [Complete] for a setup format.
3. Network Monitor is installed.
NOTE: To remove Network Monitor, go to [Programs and Features].
Network Trace Capture (Windows Server 2008)
1.
From the Start menu, start Microsoft Network Monitor.
2. On [Start Page], select [Create a new capture tab...] or select [New] in the [File] menu, and click [Capture...].
A new tab for capturing a network trace is created.
3. On the [Select Networks] window, select a network you want to capture a trace.
4. On the [Capture] menu, click [Start] to start capturing a network trace.
5. On the [Capture] menu, click [Stop] to stop capturing a network trace.
6. On the [File] menu, select [Save As...].
The [Save As] window appears. Select [All captured frames] from [Frame selection], and enter the names of a folder
and a file.
NOTE: The default folder name is:
C:\Users\<User name>\Documents\Network Monitor 3\Captures
7. Click Save to create the file in the folder selected in step 6.
Network Monitor (Windows Server 2003)
To use Network Monitor, you need to restart the system after the installation has completed, so we recommend you install
Network Monitor before any network trouble may occur.
1. Point to [Settings] from the Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Add or Remove Programs].
The [Add or Remove Programs] dialog box appears.
3. Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.