User`s guide

5-58 Installing the Operating System with Express Setup
SETTING FOR SOLVING PROBLEMS
Set up the following issue in advance so that your computer can recover from any trouble precisely and as soon as possible
when it should occur.
Memory Dump (Debug Information) - Windows Server 2008 -
This section describes the procedures for collecting memory dump (debug information) in the server.
IMPORTANT: Cautions for the Memory Dump
 The maintenance service representative is in charge of collecting memory dump. Customers
need only to specify the memory dump.
 If any trouble occurs after specifying the process below, a message informing that the system
has a virtual memory shortage may appear, but continue to start the system. If you restart the
system in such case, the memory dump may not be stored correctly..
Follow the procedure below to specify the memory dump.
1. Select [Control Panel] and click [System].
The [System] dialog box appears.
2. Click [Advanced system settings].
The [System Properties] dialog box appears.
3. Select [Advanced] tab.
Click [Settings] on the [Startup and Recovery] group box.
4. Modify [Dump file:] in the [Write debugging information] group box.
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP