User`s guide

5-56 Installing the Operating System with Express Setup
Installing RAID Controller Driver
The installation procedure depends on your environment.
Follow the below steps appropriate to your environment.
z If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is used:
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-Play.
z If the Internal RAID Controller or LSI Logic SAS CTRL 8708EM2 is not used:
Install the driver using the following procedures.
1. Start [Device Manager] from the [Start] menu → [Control Panel] → [Administrative Tools]→[Computer
Management].
2. Double-click the RAID Controller which Device Manager lists as Other device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "No, not this time" and click [Next].
5. Select "Install from a list or specific location [Advanced]" and click [Next].
6. Select "Don't search. I will choose the driver to install" and click [Next].
7. Select "SCSI and RAID controller" and click [Next].
8. Click [Have Disk..].
9. Insert the ExpressBuilder DVD into the optical disk drive, enter "<drive letter>:\009\win\winnt\oemfd\dotnet\fd1"
into "copy manufacturer's file from:" and click [OK].
10. Specify the following driver and click [Next].
– [LSI Logic MegaRAID SAS 8880EM2 RAID
Controller]
The installation of the driver is completed.
Restart the system.