User`s guide

Installing the Operating System with Express Setup 5-53
Setting the WOL Feature
Refer to the following procedure to enable WOL (Wake On LAN).
When PROSet is not installed
1.
Start Device Manager.
2. Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server Network
Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2] to open the adapter [Properties].
3. Click the [Power Management] tab and change setting in [Wake On LAN] according to the following list.
Setting item
Default
setting
Change
setting
"Allow the computer to turn off this device to save power" ON ON
"Allow this device to bring the computer out of standby" OFF ON
4. Click the [Advanced] tab and point to [Enable PME].
5. Select Enable in [Value].
6. Click [OK].
7. Reboot the system.