User`s guide

5-52 Installing the Operating System with Express Setup
9. Refer to the following procedure to set the team member adapter priority status.
– Set Primary
Point the adapter and click the [Set Primary] button.
– Set Secondary
Point the adapter and click the [Set Secondary] button.
NOTE: Adapter priority configuration can be confirmed by the following procedure:
1. Click [TEAM: "Team name"] from [Device manager] → [Network adapters].
2. Click [Settings] and confirm Adapters in team list.
10. Click [Test Switch] → [Run test] to confirm the adapter team is properly setup.
Confirm the result in [Test results]
11. Reboot the system.
Removing a Team
1.
Open the [Device Manager].
2. Click [Network adapters], and open [TEAM: "Team name"] properties.
3. Click the [Setting] tab.
4. Click the [Remove Team] button.
5. Click [Yes] to the message.
6. Confirm [TEAM: "Team name"] adapter does not exist in the [Network adapters] tree and reboot the system.