User`s guide

5-50 Installing the Operating System with Express Setup

Optional Network Board Driver

To utilize an optional Network Board, the network driver will be installed automatically. Therefore, the driver attached to the

Network board should not be used.

If you want to use the optional Network Board (Intel pro/100S), install the driver stored in ExpressBuilder DVD.

When usingIntel Pro/100S serve adapter

"\009\win\winnt\dotnet\ma21\pro100\win32"

When using the other LAN server adapters

"\009\win\winnt\dotnet\ma21\pro1000\win32"

If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the

Optional Network Board Driver".

When using Intel Pro/1000 PT server adapter

Please refer to the installation manual provided with the board.

Installation of the Optional Network Board Driver

Start Device Manager.

2. Click [Network adapters] and double-click [(Network Adapter Name)].

[(Network Adapter Name) Properties] appears.

NOTE: [(Intel(R) PRO/1000...)] is the name of the on-board adapter. All other names refer to the

optional network boards.

3. Click the [Driver] tab and select [Update Driver...]. The [Hardware Update Wizard] appears.

4. Select the [Install from a list or specific location (Advanced)] radio button and click [Next].

5. Select the [Search for the best driver in these locations] radio button and check off the [Search removable media

(floppy, CD-ROM...)] check box.

6. Check the [Include this location in the search] check box and when using Intel Pro/100S, specify

[\009\win\winnt\dotnet\ma21\pro100\win32].

Then click [Next].

When using the other LAN Server adapters, specify [\009\win\winnt\dotnet\ma21\pro1000\win32].

Then click [Next].

7. Click [Finish].