User`s guide

Installing the Operating System with Express Setup 5-41
7. Select the installing Operating System.
Select [Install the Windows (32bit editions)] from the menu, click [Next].
8. Enter the setting of a logical drive.
The [Enter RAID settings] steps are displayed. Confirm the parameters, modify if necessary, and then click [Next].
NOTES:
 You can use only the physical devices that have an identical model number to configure the
logical drive.
 If the process does not finish normally, the driver may not be stored in the ExpressBuilder.
Refer to "Optional Board Supported by ExpressBuilder" described earlier in this chapter.
9. Specify the installation medium and the Windows system partition.
The [Specify medium / Partition] steps are displayed. Confirm the parameters, modify if necessary, and then click
[Next].