User`s guide

Installing the Operating System with Express Setup 5-39
Installing Windows Server 2003
Express Setup proceeds the setup by selecting or inputting several parameters during the wizard. You can also save the
parameters to a floppy disk as a parameters file.
1. Turn the power of peripheral device on, and then turn on the server.
2. Insert the ExpressBuilder DVD into the optical disk drive of the server.
3. Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the ExpressBuilder. (You may also turn off
and then on again to reboot the server.)
The system will boot from the DVD-ROM and ExpressBuilder starts.
Select "Os installation *** default ***" from the Boot selection menu. (If you do not hit any key, "Os installation" is
selected automatically.)
The Top menu will appear.
4. Select [English] from the Select Language screen, then click [OK].
5. Select [Perform the Express setup] from the Top Menu, click [Next].