User`s guide

Installing the Operating System with Express Setup 5-35
About the Hardware Components
When you install the Windows Server 2003, Express Setup requires several preparations if this computer uses the following
hardware components.
Installing on the Mirrored Volume
If you want to install the Windows Server 2003 on the volume that is mirrored using "Disk Management", invalidate the
mirroring and set back to the basic disk before the installation, and validate the mirroring again after the installation.
You can create, invalidate or delete the mirror volume by using "Disk Management" in "Computer Management".
Mounting MO Device
Do not mount an MO device on this computer during the Windows installation.
About Removable Media
Do not set removable media, such as DAT, into the device mounted on this computer during the Windows installation.
Connecting a Hard Disk Drive
Do not connect other hard disk drives than the drive on which you want to create the Windows system drive.If you create
multiple logical drives in your system, see "Re-installing the Operating system when multiple logical drive exist" (Appendix
E).
Re-installing to the hard disk drive which has been upgraded to Dynamic Disk
You cannot re-install Windows Server 2003 if the current partition of the hard disk drive upgraded to Dynamic Disk remains.
If you want to keep the current partition, see Appendix E to re-install the system.