User`s guide

5-34 Installing the Operating System with Express Setup
Supported Mass Storage Controllers
The ExpressBuilder DVD attached to your system supports the following mass storage controllers for installation.
NOTE: If you want to install the other boards by using a driver floppy disk ("OEM-Disk for
Mass storage device"), except the ones listed below, see "Installing with the OEM-Disk for Mass
storage device" and "Installing Optional Mass Storage Driver" of "Parameter File Creator" in
Chapter 6.
 Controllers supporting installation of OS with Express Setup
– Internal RAID Controller
– LSI Logic SAS CTRL 8708EM2 RAID
Controller (128MB, RAID0/1)
– LSI Logic SAS CTRL 8708EM2 RAID
Controller (128MB, RAID0/1/5/6)
– LSI Logic SAS CTRL 8708EM2 RAID
Controller (256MB, RAID0/1/5/6)
– Onboard RAID Controller (LSI Embedded
MegaRAID™)
 Other controllers
– ADAPTEC 29320ALP SCSI Controller*
– ADAPTEC 29160LP SCSI Controller*
– LSI Logic SAS3442E-R SAS Controller*
– Adaptec ASC-29320LPE SCSI U320 PCI-E SCSI
Controller*
* Option.
NOTES:
 The driver for the option cards mentioned above is stored in the ExpressBuilder DVD.
 If you use a board not mentioned above, the ExpressSetup will fail. Refer to the instructions
attached to the board.