User`s guide

Installing the Operating System with Express Setup 5-31
4. Reboot the system.
The setting mentioned above is active after reboot.
5. Execute the following command line on command prompt.
bcdedit
Confirm "pae ForceEnable" exists in "Windows boot loader".
The setting for PAE option is now completed.
Refer to the following site about Bcdedit.exe.
"Boot Configuration Data Editor Frequently Asked Questions"
http://technet.microsoft.com/en-us/library/cc721886.aspx
Setting for Solving Problems
Set up your computer in advance so that it can recover from any trouble precisely and as soon as possible when it should occur.
For more information, refer to Page 5-58.