User`s guide

5-28 Installing the Operating System with Express Setup
Setting WOL
Refer to the following procedure to enable WOL.
1. Start Device Manager.
2. Point to [Network adapters] and double click [Intel(R) 82576 Gigabit Dual Port Server Network
Connection]/[Intel(R) 82576 Gigabit Dual Port Server Network Connection #2] to open the adapter [Properties].
3. Click the [Power Management] tab and change the setting in [Wake On LAN] according to the following list.
Setting item Default setting Change setting
"Wake On Directed Packet" ON OFF
"Wake On Magic Packet" ON OFF
"Wake on Magic Packet from power off state" OFF ON
NOTES:
 Change to the[Power Saver Options] setting is not necessary.
 The above setting will be kept until it is changed manually.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if the network ports do not
support WOL.
4. Click [OK].
5. Reboot the system.
IMPORTANT:
 WOL (Wake On Lan) is available only in system Shutdown mode.
 WOL (Wake On Lan) is not available in system Hibernate and Sleep modes.