User`s guide

5-12 Installing the Operating System with Express Setup
NOTES:
 You can use only the physical devices that have an identical model number to configure
logical drive.
 If the process does not finish normally, the driver may not be stored in the ExpressBuilder.
Refer to "Optional Board Supported by ExpressBuilder" described earlier in this chapter.
 When you use RAID Controller, if [Skip the logical drive creation] is not selected in the
[Enter RAID settings] screen, refer to "RAID Configuration (Chapter 4)" or "Creating new
RAID using RAID Controller (Page 5-72)" to create RAID beforehand.
9. Specify the installation medium and the Windows system partition.
The [Specify medium / Partition] steps are displayed. Confirm the parameters, modify if necessary, then click [Next].