User`s guide

5-2 Installing the Operating System with Express Setup
About Express Setup
"Express Setup" helps you to install the Windows Operating System. The setup automatically configures the RAID System and
installs the Operating System and some management software.
IMPORTANT: Executing the Express Setup erases all data on the hard disk drive.
You can also use the "Parameters File" during "Express Setup" in order to save or backup the installation parameters.
If you want to set up the server using parameters defined previously, execute the Express Setup using an existing parameters
file..
NOTES:
 If you want to create a parameters file, have a blank floppy disk (MS-DOS 1.44MB format)
ready.
 When using a floppy disk, a USB floppy disk drive is required.
 If you want to use the drivers located on the "OEM-Disk for Mass Storage Device" that ships
with optional boards, a parameters file is mandatory.
 You can create a parameters file in advance using "Parameter File Creator" included in the
ExpressBuilder.