User`s guide

Configuring Your Server 4-95
5. Select "Migration with addition".
6. Specify the RAID level used after reconstruction.
7. Select a Hard Disk Drive to be added.
8. When you finished Steps 5 to 7, click [Go] at the lower right corner of the screen.
9. The progress of reconstruction is displayed on the lower left corner of the screen. Click [Home] at the lower left
corner of the screen to return to the WebBIOS Top Menu.
IMPORTANT:
 The capacity of the virtual drive may be incorrectly displayed after reconstruction. In this case,
perform a Scan Devices process from the Top Menu.
 Click [Home] while the background task such as Consistency Check, Rebuild, or
Reconstruction is being executed. When the progress indication bar is being displayed, the
background task may be processed at a slow rate.
Information of physical devices
in the DG in which a VD is
defined.
Migration Only:
A
llows change of RAID level.
Migration with addition:
A
llows addition of physical
device and change of RAID
level.