User`s guide

4-94 Configuring Your Server
Reconstruction
Described below are procedures based on assumption:
Add a Hard Disk Drive to a RAID5 VD configured with three Hard Disk Drives to make a RAID5 VD configured with four
Hard Disk Drives.
1. Start WebBIOS.
Make sure that the status for the added Hard Disk Drive is indicated as "Unconfigured Good" in the right frame of
the Top Menu.
2. Select a VD you want to reconstruct (VD 0 in the example) from the right frame of Top Menu.
3. The setting menu for the VD is displayed.
4. On the right side of the screen, items required for the reconstruction are displayed.