User`s guide

4-74 Configuring Your Server
IMPORTANT:
 The value shown in "Select Size" indicates the maximum size allowed for RAID1 (two Hard
Disk Drives) or RAID6 (three or more Hard Disk Drives). You need to specify the maximum
size for any other RAID levels according to "Next LD, Possible RAID Levels".
 To use RAID 5, RAID 6, or RAID50, you need to additionally install the optional Upgrade Kit.
 If the Upgrade Kit is not installed, do not select "RAID5" that may appear in [RAID Level]
box. If selected, you will fail to save the configuration information. In such a case, you need to
define a VD again from the beginning.
5. Once the VD is defined, click [Next].
IMPORTANT:
 RAID1 may be configured with three or more Hard Disk Drives in the drive group. However,
with this controller, the drive group must contain only two Hard Disk Drives.
 WebBIOS does not support the RAID6 logical drive with a Stripe Size of 8KB and composed
of three Hard Disk Drives.