User`s guide

Configuring Your Server 4-67
Configuration Wizard
Use this wizard to configure a virtual drive using the Hard Disk Drives connected. The detailed explanation of this feature is
given in "Configuring a Virtual Drive".
Controller Selection
If one or more RAID controllers are installed in the server, you need to select an adapter controlled by WebBIOS to configure
each adapter. Clicking [Controller Selection] on the WebBIOS top menu opens the [Adapter Selection] screen.
Physical View / Logical View
If the virtual drive has been configured, DG (drive group) is displayed on the WebBIOS Top Menu. Clicking [Physical View]
displays information for the Hard Disk Drives in DG. Clicking [Logical View] displays the virtual drive in the DG.
Events
The Events screen is used to confirm the system events.
IMPORTANT: The RAID Controller does not support the Events feature.