User`s guide

4-66 Configuring Your Server
Physical Drive Properties
Locate: Let Disk Status lamp light or blinks.
Make Global HSP:
The selected Hard Disk Drive is assigned as hot-spare available for all
DGs.
Make Dedicated HSP:
The selected Hard Disk Drive is assigned as hot-spare available only
for the specific DG.
Remove HOTSPARE:
The selected Hard Disk Drive is unassigned from hot-spare and made
Unconfigured Good state.
Make Unconf Bad:
Make the selected Hard Disk Drive in faulty state. This is indicated on
the Hard Disk Drive of which status is "Unconfigured Good".
Make Unconf Good
Make the selected Hard Disk Drive in "Unconfigured Good" state. This
is indicated on the Hard Disk Drive of which status is "Unconfigured
Bad".
Prepare Removal:
Make the power status of the selected Hard Disk Drive in "Powersave"
state.
This is indicated on the Hard Disk Drive of which power status is "On"
and the status is "Unconfigured Good".
Undo Removal: Make the power status of the selected Hard Disk Drive in "On".
This is indicated on the Hard Disk Drive of which power status is
"Powersave".
Make Dive Offline: Make the selected Hard Disk Drive in "Offline" state.
This is indicated on the Hard Disk Drive of which status is "Online".
Make Drive Online: Make the selected Hard Disk Drive in "Online" state.
This is indicated on the Hard Disk Drive of which status is "Offline".
Rebuild Drive: Start rebuilding VD that contains the selected Hard Disk Drive.
This is indicated for the Hard Disk Drive of which status is "Offline".
Mark as Missing: Remove the VD that contains the selected Hard Disk Drive from the DG.
This is indicated on the Hard Disk Drive of which status is "Offline".
IMPORTANT: The RAID Controller does not support the Events feature.