User`s guide

4-62 Configuring Your Server
Scan Devices
When you click [Scan Devices] on the WebBIOS Top Menu, the connected Hard Disk Drives are detected again. Use this
feature when you have installed an additional Hard Disk Drive while WebBIOS is running.
IMPORTANT:
 If the newly connected Hard Disk Drive contains another configuration information, the
[Foreign Configuration] screen as shown below appears. To use the Hard Disk Drive as a new
one, click [Clear] to clear the configuration information of the Hard Disk Drive.
 If you want to create a logical drive by using the Universal RAID Utility with the newly
connected Hard Disk Drive containing another configuration information, first clear this
configuration information using this Scan Devices feature.
(*) the Universal RAID Utility does not have this feature.