User`s guide

4-42 Configuring Your Server
Others
 Clear Configuration
Clears configuration information. Select "Configure" → "Clear Configuration" from the TOP menu. Executing
"Clear Configuration" clears all configuration information on the RAID Controller and hard disk drives. The
configuration information on all channels of the RAID Controller is also cleared.
NOTE: LSI Software RAID Configuration Utility cannot delete each virtual drive. Use Universal
RAID Utility instead.
 Force Online
Puts a hard disk drive being in the FAIL status online.
Select "Objects" → "Physical Drive" → (select hard disk drive) → "Force Online" from the TOP menu.
 Rebuild Rate
Sets the Rebuild Rate.
Select "Objects" → "Adapter" → "Sel. Adapter" → "Rebuild Rate" from the TOP menu.
Available value is between 0% and 100%. Default value (recommended) is 30%.
 Hard disk drive information
Checks hard disk drive information.
Select "Objects" → "Physical Drive" → (select hard disk drive) → "Drive Properties" from the TOP menu.