User`s guide

Configuring Your Server 4-33
Initialize virtual drive
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
1. Run LSI Software RAID Configuration Utility.
Select "Configure" → "New Configuration" from the TOP menu (Management Menu).
Select "View/add Configuration" to add configuration.
IMPORTANT:
 Creating a configuration using "New Configuration" menu clears the existing configuration
information. To add configuration information to the existing configuration, select "View/add
Configuration."
 You cannot create Spanning of RAID1 or set the virtual drive capacity on "Easy Configuration"
menu.
Use "New Configuration" or "View/Add Configuration" instead.