User`s guide

Configuring Your Server 4-31
Running LSI Software RAID Configuration Utility
1.
Power on the server.
Check the description as shown below on the POST screen, then press Ctrl + M.
Press <Ctrl><M> or Enter to Run LSI Software Configuration Utility
LSI Software RAID Configuration Utility starts.
If you fail to press Ctrl + M and the system proceeds without displaying the following menu screen, reboot the
system, and press Ctrl + M on POST screen.
LSI Software RAID Configuration Utility TOP Menu (Management Menu)
To quit the utility, press Esc in the TOP menu of LSI Software RAID Configuration Utility.
When a confirmation message appears, select [Yes].
When the above message appears, press Ctrl + Alt + Delete.
The server is rebooted.