User`s guide

Configuring Your Server 4-21
Boot
If you move the cursor to the position of "Boot," the Boot menu appears, which is used to set the boot priority.
Indication Device
USB CDROM USB CD-ROM drive
IDE CD ATAPI CD-ROM (including optical disk drive)
USB FDC USB floppy disk drive
USB KEY USB flash memory device
IDE HDD IDE hard disk drives
USB HDD USB hard disk drives
PCI SCSI
Internal hard disk drives installed in your system (“Software RAID” is
displayed in the RAID configuration.)
PCI BEV
IBA GE Slot xxxx
Onboard LAN.
LAN1: Slot 0100, LAN2: Slot 0101
Other indication
Optional PCI board connected to the riser module.
1. When BIOS detects a bootable device, it displays the information on the device in the relevant indication.
To boot the server from a desired device, the device must be registered as a boot device. (Up to eight boot devices
can be registered.)
2. Pressing X after selecting a device allows the selected device to be registered as a boot device or deleted from the
registration.
With eight boot devices being registered, any other device cannot be registered as a boot device even if you press X.
To register a device as a boot device newly, first delete the registration of a device registered as a boot device but not
booted any more.
Pressing Shift + 1 after selecting a device allows the selected device to be made enabled/disabled.
3. You can change the boot priority (first to eighth) of each device by using ↑, ↓, + and/or –.
To change the priority of a device, move the cursor to the device by using the ↑ or ↓, and press + or –.